QQ在线
产品介绍
Overview
The e 912 S is a high-quality, pre-polarised condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns.
Features
☆ Programmable membrane switch
☆ Very unobtrusive due to flat design
☆ Extremely rugged sound inlet basket
☆ Rubber damping plate on base
☆ Mounting slots for mounting the microphone to table tops, lecterns, etc.
☆ Gold-plated XLR connector
☆ Integrated electronics (instead of in-line preamp)
☆ An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
☆ The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).
☆ The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up.
☆ For this reason, the frequency response curve of the e 912 S differs from that of the e 912.
☆ With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear).
Technical Data
Transducer principle (Microphone)：pre polarised condenser microphone
Pick-up pattern：half-cardioid
Frequency response (microphone)：20 Hz - 20 kHz
Sensitivity in free field, no load (1kHz)：6 (10) mV/Pa Depending on adjusted frequency response curve.
Impedance：< 100 Ohm
Min. terminating impedance：1 kOhm
Equivalent noise level：26 dB (A)
Equivalent noise level weighted as per CCIR 468-3：37 dB
Phantom powering：P48
Current consumption：2,8 mA
Connector：XLR-3
Weight：550 g
Dimensions：126.5 x 105 x 26.5 mm
Maximum sound pressure level (passiv)：134 dB SPL
