面板配件 PS-PoE-EX0.9

OVERVIEW
The PS-PoE-EX0.9 PoE extractor enables the Novara 3000 Series ControlPads to be powered via a PoE-enabled switch. The extractor takes a PoE input and outputs a 900mA +12VDC signal to power the ControlPad, and a non-PoE Ethernet signal for communicating with the ControlPad.

COMMON APPLICATION
Use the PS-PoE-EX0.9 in conjunction with a PoE-enabled switch to power the Novara 3000 Series ControlPads.

FEATURES

◆  Converts a LAN connector PoE source into a data-only LAN output and a voltage-only output via a standard DC connector

◆  Eliminates need to have AC power source to power ControlPad via the included power supply

◆  Mount the PoE extractor in a discrete location using the mounting holes

SPECIFICATIONS

DIMENSIONS (LWH)
3" x 2 1/8" x 1" (7 5/8 cm x 5 1/3 cm x 2 1/2 cm)

WEIGHT
2 oz (58 g)

OPERATING TEMPERATURE

◆  Storage temperature range: -40° to 185° F (-40° to 85° C)

◆  Operating temperature range: -40° to 140° F (-40° to 60° C)

CERTIFICATIONS
RoHS

GENERAL

◆  Switching Frequency: 200kHz ± 1%

◆  Recovery Time: 100Usec to 1% V-out (SR= 1a/10Usec)

◆  I-overload: 120% ± 5%

◆  Short Circuit: Auto recovery when short is removed

◆  Thermal Shutdown: Internally protected against over-temp conditions.

INPUT CONNECTOR
Standard LAN connector

OUTPUT

◆  Output Voltage: 12V DC

◆  Output Current: 0.9A

◆  Output Power: 10.8W

◆  Line and Load Voltage Regulation: ±1% V-out

◆  Efficiency: 88% min.

◆  Transient Response: 1% of V-out (50%-100% load deviation)

◆  Overvoltage Protection: Transorb protected

◆  Output Connection: Standard

◆  Output Noise: 1% of V-out, 20MHz BW

INPUT

◆  Input: 36-57 VDC

◆  Input Current Overload Protection: When Iin > 450mA for 75mSec, input latches off

◆  Input Surge: Transorb protected

◆  Input Undervoltage

    ◆  Turn on: 33-42VDC

    ◆  Turn off: 30-34VDC