AMX 网关连接 NXB-CCG

OVERVIEW
The AMX Clear Connect Wireless Gateway connects NetLinx Controllers with Lutron's Clear Connect Dimmers, Switches, Occupancy/Vacancy Sensors and Keypads. The Gateway includes a web interface for simplified integration, configuration, and programming of Clear Connect devices. When integrated with an AMX NetLinx Controller, installers now have a simple and cost-effective path to offer smart room automation that includes light and AV control from a single interface, occupancy sensing, scheduled shutdown and energy management.

COMMON APPLICATIONS
Ideal for new and retrofit applications looking for the least costly way to add light and AV control to a room. Use the Clear Connect Gateway with Lutron's Clear Connect Dimmers, Switches, Keypads, and/or Occupancy/Vacancy Sensors.

FEATURES

◆  Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices

◆  Perfect Way to Add Light Control – Easily integrates with existing electrical infrastructures – simply replace the light switch

◆  Create Light & Control Events with Room Occupancy – Use the Clear Connect Wireless Occupancy Sensor with RMS to automatically power-up and shut-down the lights and AV equipment to maximize energy conservation

◆  Simple Web Configuration – Browse to the NetLinx Clear Connect Gateway URL to quickly configure and program Clear Connect Enabled Switches, Dimmers, Keypads and Occupancy/Vacancy Sensors

SPECIFICATIONS

DIMENSIONS (HWD)

◆  Without antenna: 1 1/8" x 2 5/8" x 4 7/16" (2.86 cm x 6.60 cm x 11.23 cm)

◆  With antenna: 6 1/2" x 2 5/8" x 4 7/16" (17.15 cm x 6.60 mm x 112.27 mm)

WEIGHT
0.3 lbs (136.08 g)

POWER

◆  Input: 100-240VAC 50/60 Hz, 0.3A Max

◆  Output DC adapter: 5V DC, 2A

◆  Surge Protection: To withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits

◆  Power Failure Memory: Should power be interrupted, the Clear Connect Gateway will return to its previous state when power is restored.

ENVIRONMENTAL

◆  Operating Temperature: 32° F (0° C) to 104° F (40° C)

◆  Operating Humidity: 0% to 90%, non-condensing

◆  Indoor use only

ESD PROTECTION
To withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2

COMMUNICATIONS

◆  Ethernet: Supported IP and IP-Based Protocols: TCP,DHCP, Telnet, HTTP, HTTPS, SSH

◆  RF: The Clear Connect Gateway communicates to a maximum 31 Clear Connect devices through 434 MHz RF

◆  USB: Manufacturer use only

◆  Protocol: The Clear Connect Gateway supports the ZeroConf auto discovery protocol

FRONT PANEL COMPONENTS

◆  Power Status LED: Displays power status and other system status indicators

◆  RF LED: Displays the Tx/ Rx activity on the RF link

◆  Ethernet LED: Displays the connection status and Tx/ Rx activity on the Ethernet link

REAR PANEL COMPONENTS

◆  Cat5 Cable Port: 10/100 port, RJ-45 connector. Maximum cable length: 328 ft (100 m)

◆  USB Cable Port: Manufacturer use only

◆  Reset Button: Press and hold for 20 seconds to restore the system to the Factory Default settings

◆  Power Jack (to DC adapter): (IEC PELV / NECR Class 2)

CERTIFICATIONS
UL, FCC, CUL, IC