QQ在线
产品介绍
OVERVIEW
The Enova DVX-2150HD is an all-in-one controller, AV matrix switcher, scaler, analog to digital signal converter, twisted pair transmitter and amplifier with built-in professional grade audio processing. Easily integrate HDCP into system designs and enjoy hassle free plug-and-play operation. No tools, no delays, and no key constraints - it just works with AMX's exclusive InstaGate Pro™ Technology. Designed to simplify system design and provide a future proof solution, the DVX-2150HD's multi-format video inputs support analog and digital signals including HDMI with HDCP sources - all in the same connector. The state-of-the-art professional grade audio DSP delivers quality audio throughout a room. Built-in SmartScale® Technology outputs video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions - making the DVX-2150HD easy to specify, easy to install and easy to use.
COMMON APPLICATIONS
Ideal All-In-One Presentation Switcher designed to dramatically simplify AV control and distribution in small to medium conference rooms, classrooms and auditoriums. The flexible DVX-2150HD is perfect for any room with a mix of analog and digital sources, multiple displays, or rooms that require support for video conferencing
FEATURES
◆ All-In-One Presentation Switcher in a 3 RU Box – Controller, matrix switcher, scaler, analog to digital converter, amplifier, plus twisted pair distribution and professional-grade audio DSP
◆ HDMI/HDCP Switching with Simplicity of Analog – End-to-end distribution of HDMI/HDCP without interruption or key constraints using InstaGate Pro Technology
◆ Matrix Switching – Freely route any input to any or all outputs without blocking - 6X3 video switcher and 8x3 audio switcher with audio breakaway
◆ SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
◆ AV and Control Over Twisted Pair – Send audio, video, bi-directional control, Ethernet and power up to 100m over one standard twisted pair cable
◆ Analog to Digital Video Conversion With Scaled Outputs – Converts any source signal to digital and uses SmartScale Technology to automatically output video that is perfectly scaled for each connected display
◆ Game Changing Device – Standardizing on this box reduces Total Cost of Ownership
SPECIFICATIONS
DIMENSIONS (HWD)
5 3/16" x 17" x 14" (13.2 cm x 43.2 cm x 35.6 cm)
WEIGHT
18.3 lb (8.31 Kg)
POWER
◆ TBD Watts typical without amplifier
◆ TBD to 100 Watts typical average with amplifier
◆ 30 Watts typical in low-power mode
MEMORY
◆ 256 MB SDRAM
◆ 1 MB Non-volatile (NV) SRAM
◆ 256 MB FLASH
AMPLIFIER
◆ DVX-2150HD-SP: 2 x 25W into 8 Ohms Class D stereo amplifier (4-ohm stable)
◆ DVX-2150HD-T: 75W, 70V / 100V mono amplifier
ENCLOSURE
Metal with black matte finish
INTEGRATED CONTROLLER
Equivalent of a NetLinx NI-2100 Central Controller on-board
FRONT PANEL COMPONENTS
◆ LINK/ACT (green): Link/Activity LED blinks when receiving Ethernet data packets.
◆ STATUS (green): Status LED blinks to indicate that the system is programmed and communicating properly.
◆ INPUT (yellow): Input LED blinks to indicate that the Controller is receiving data.
◆ OUTPUT (red): Output LED blinks to indicate that the Controller is transmitting data.
◆ RS-232 / 422 / 485 (red/yellow): 3 sets of LEDs indicate that RS-232/422/485 Ports (1-3) are transmitting or receiving data.
◆ RELAYS (red): 4 LEDs indicate that one or more of the relay channels (1-4) are active (closed).
◆ IR/SERIAL (red): 4 LEDs indicate that one or more of the IR/Serial ports (1-4) are transmitting control data.
◆ I/O (yellow): 4 LEDs indicate that one or more of the I/O channels (1-4) are active.
◆ SWITCH pushbutton: Press to enter the SWITCH menu on the LCD display. Choose to switch audio, video or both from any input to any output. Press the TAKE pushbutton to implement the switch.
◆ TAKE pushbutton: While in the SWITCH menu, press to implement an audio/video switch. When not in the SWITCH menu, press to cycle through audio and/or video inputs.
◆ LCD display: Liquid crystal display (2 lines with 20 characters per line) indicates current volume level and displays the Video, Audio, and Tools menus.
◆ VIDEO MENU pushbutton: Press to access the Video menu on the LCD display. Multiple presses cycle through the various VIDEO menus.
◆ AUDIO MENU pushbutton: Press to access the Audio menu on the LCD display. Multiple presses cycle through the various AUDIO menus.
◆ Navigational pushbuttons: 4 directional buttons for navigating the options in the Video and Audio menu (on the LCD display).
◆ STATUS pushbutton: Press to access the STATUS menu on the LCD display.
◆ EXIT pushbutton: Press to exit any menu.
◆ VIDEO MUTE pushbutton: Press to mute/un-mute (enable/disable) all video output displays. Video Mute results in a blank screen on the output display.
◆ AUDIO MUTE pushbutton: Press to mute/un-mute all audio outputs.
REAR PANEL COMPONENTS
◆ RS-232/422/485 (Ports 1-3) provide serial control via DB9 (male) connectors:
○ XON/XOFF (transmit on/transmit off)
○ CTS/RTS (clear to send/ready to send)
○ 300-115,200 baud
◆ RELAYS (Port 4) provides relay control via one 8-pin 3.5 mm captive-wire connector:
○ 4-channel single-pole single-throw relay ports
○ Each relay is independently controlled
○ Supports up to 4 independent external relay devices
○ Channel range = 1-4
○ Each relay can switch up to 24 VDC or 28 VAC @ 1 A
○ One 8-pin 3.5 mm mini-Phoenix (female) connector provides relay termination
◆ IR/SERIAL (Ports 5-8) provide IR/Serial control via 2-pin 3.5 mm captive-wire connectors:
○ Supports high-frequency carriers of up to 1.142 MHz
○ 4 IR/Serial data signals can be generated simultaneously
◆ I/O (Port 9) provides 4-channel binary I/O port for contact closure with each input being capable of voltage sensing.
◆ AUDIO INPUTS:
○ UNBALANCED AUDIO LINE INPUTS 2 1/8th-inch mini-jack connectors receive up to four unbalanced line-level audio inputs
○ Nominal input level: -10 dBV (0.3162 Vrms)
○ Maximum input level: 2 Vrms
○ Input impedance: >12k ohms unbalanced, >12k ohms balanced, DC coupled
○ BALANCED AUDIO LINE INPUTS 2 3.5mm 5-pin captive-wire connectors receive up to four balanced/unbalanced line level audio inputs
○ Nominal input level: +4 dBu (1.228 Vrms) balanced or -10 dBV (0.3162 Vrms) unbalanced
○ Maximum input level: 2 Vrms
○ Input impedance: >12k ohms unbalanced, >12k ohms balanced, DC coupled
○ DIGITAL AUDIO INPUTS: supported on all HDMI inputs
○ MIC/LINE INPUTS: 2 3.5mm 3-pin captive-wire connectors receive up to 2 mono microphones (balanced or unbalanced audio and switchable Phantom Power).
◆ AUDIO OUTPUTS:
○ ANALOG AUDIO OUTPUTS:
○ AMP: 4-position captive wire connector provides amplified audio output with volume control
○ LINE: 2 3.5mm 5-pin captive-wire connector provides for fixed or variable, balanced or unbalanced, mono or stereo line level audio output
○ DIGITAL AUDIO OUTPUTS:
○ S/PDIF: 1 Coaxial RCA connector provides digital S/PDIF audio output that can mirror any of the 4 analog audio outputs, or any of the 4 HDMI outputs
○ HDMI: Digital versions of any analog audio output or direct pass-through audio are provided on each HDMI output
○ DXLink: Digital versions of any analog audio output or direct pass-through audio are available on the DXLink output
◆ VIDEO INPUTS
○ 2 MULTI-FORMAT VIDEO INPUTS (1-2): 4 DVI-I input connectors provide multi-format video inputs for up to four video sources. Each VIDEO INPUT connector supports HDMI/HDCP, DVI, RGBHV, S-Video, composite, or component video input.
○ 4 HDMI INPUTS (3-6): 4 HDMI input connectors provide support for HDMI/HDCP or DVI video sources
◆ VIDEO OUTPUTS
○ 2 HDMI OUTPUTS (1-2): 2 HDMI output connectors provide both digital video and audio. Supports HDCP
○ 1 DXLINK OUTPUT (3): 1 DXLink CAT5 output provides digital video, audio, Ethernet, bi-directional control and power over Category Cable to DXLink Receivers. Supports HDCP.
◆ CONFIG DIP Switch: 8-position Master configuration DIP switch allows setting the Serial Programming port baud rate and onboard Master execution mode (PRD or normal)
◆ PROGRAM Port: DB-9 connector that supports RS-232 communications to a PC for system configuration and diagnostics
◆ ID Pushbutton: Black ID pushbutton sets the NetLinx Device ID assignments of the Internal Control Device. It has no effect on the Internal Switcher Device
◆ ETHERNET 10/100 Port: RJ-45 connector provides TCP/IP communication. This is an Auto MDI/MDI-X enabled port, which allows you to use either straight-through or crossover Ethernet cables. The Ethernet Port LEDs show communication activity, connection status, speeds, and mode information:
○ SPD (speed) - Yellow LED lights On when the connection speed is 100 Mbps and turns Off when the speed is 10 Mbps.
○ L/A (link/activity) - Green LED lights On when the Ethernet cables are connected and terminated correctly, and blinks when receiving Ethernet data packets.
○ AxLink Port: 1 3.5 mm captive-wire connector provides data and power to external control devices. The AxLink LED (green) indicates the state of the AxLink port.
Power Connector IEC Power cord connector:
◆ 100-240V AC
◆ 47-63Hz
ENVIRONMENTAL
◆ Operating Temperature: 0° C to 40° C (32° F to 104° F)
◆ Operating Humidity: 5% to 85% RH
◆ Storage Temperature: -10° C to 70° C (14° F to 158° F)
SUPPORTED VIDEO RESOLUTIONS
Up to 1920 x 1200 @ 60Hz. See Operations Reference Guide for details
INCLUDED ACCESSORIES
◆ 1 CC-NIRC, IR Emitter w/3.5mm Phoenix (FG10-000-11)
◆ 1 CC-DVIM-VGAF, DVI to VGA Adapter (FG10-2170-13)
◆ 2 Front Rack Mounting Brackets (62-1905-15)
◆ Enova DVX-2150HD All-In-One Presentation Switcher Installation Guide (TBD)
