QQ在线
产品介绍
OVERVIEW
The Digital Generation DVI to Fiber Transmitters and Receivers transmit three unique uncompressed DVI signals up to 3,000 feet over a 12 fiber multimode MTP cable, without signal degradation or manipulation, to either an Epica DG MTP Fiber Board or directly to the receiver. Compatible with all AutoPatch Digital Generation products.
FEATURES
◆ New space saving V Style (versatile) module design
◆ Power Supply Energy Star® rated to ensure maximum efficiency and savings
◆ Automatically adjusting universal 110 / 220 IEC power supply is included with every unit
◆ Compatible with V Style mounting options including rack, surface or pole
SPECIFICATIONS
GENERAL
◆ Power Consumption (Max): +12 VDC to +24 VDC @ 1.3 A, 31 W
◆ Power Consumption (Typ): +12 VDC to +24 VDC, 14 W
◆ Power Connector: 2.1 mm DC Power Jack (DG DVI MTP® Fiber Modules use power supplies that are provided with each unit.)
◆ BTU/HR (Max): 48
◆ Operational Temperature: 32° to 110° F (0° to 43° C)
◆ Humidity: 0 to 90% non-condensing
◆ Dimensions:
○ 1.66" x 5.80" x 5.15"
○ 4.22 cm x 14.73 cm x 13.08 cm
◆ Weight: Appx. 1.5 lbs (0.7 kg)
◆ Compatible AMX AutoPatchFiber Equipment: RGBHV - MTP Fiber Modules; other AMX AutoPatch MTP Fiber products
◆ Approvals: CE, UL
DVI-MTP FIBER
◆ Resolution Support: Up to 1920x1200 @ 60Hz refresh rate with reduced blanking
◆ DDC/EDID Support:
○ EDID provided by TX Module
○ 1920x1200, 1920x1080 @ 60 Hz reduced sync blanking only
○ 1680x1050, 1600x1200 @ 60 Hz
○ 1280x1024 @ 60 Hz to 75 Hz
○ 1280x768, 1280x720, 1152x864, 1024x768, 800x600, 640x480 @ 60 Hz to 85 Hz
◆ Pixel Bandwidth (Bit Rate): 1.65 Gbps
◆ Specification Compliant: DVI 1.0, DVI-D (Single Link DVI)
◆ HDCP Support: No
◆ Input Cable Equalization: Up to 50 ft. (15.24 m)
◆ Output Reclocking: Yes
◆ Fiber Cable Types:
○ 12 Fiber Multimode MTP
○ 50/125 µm or 62.5/125 µm
◆ Fiber Cable Length: Up to 3000 ft. (914.4 m) cable requires low loss, controlled skew fiber cable, such as, Alcoa 50/125 µm Laser-Link 550
◆ Fiber Cable Termination: Female MTP
◆ Fiber Connector on Module: Male MTP (guide pins define it as male)
◆ DVI Connector: DVI-I (DVI-D is the supported signal type)
