AMX 音频控制器 DAS-T0804-SIG

OVERVIEW
The Tango Audio Controller integrates all of your audio sources and makes them easily accessible from a single, centrally managed location. The DAS-T0804-SIG controls up to 8 sources and distributes audio to up to 4 rooms or zones. Control sources using the Mio R-1 Audio Control and Metreau Audio Keypads or with a PC using the optional DAS-MNET. Sources such as Satellite Receivers, CD Players, MP3 Players and Media Servers can be connected to the RCA source inputs on the rear panel. Tango's modular design allows it to grow with you to accommodate future technologies via replaceable tuner and interface cards. While it can inherently support 8 sources and 4 zones, up to 7 Tango Zone Expanders can be added to the system to add up to 60 rooms/zones.

COMMON APPLICATION
Ideal for central control of multiple audio sources in kitchens,patios, bedrooms, bathrooms and living areas in single-family homes, condominium buildings, restaurants, spas and small offices.

FEATURES

◆  Can control 8 sources and distribute to 4 rooms/zones

◆  Expandable to 60 zones with Tango Zone Expander

◆  40 watts per channel of stereo sound delivered to each zone

◆  Includes AM/FM tuner

◆  Macro capable / Software adjustable input attenuation/output gain

◆  RS-232 communication, control port and RJ-11 expansion ports

◆  Dedicated IR outputs, 8 audio inputs/outputs (buffered)

◆  Standard SRS/WOW® technology enhances performance of amplifiers

◆  110 VAC (Included with FG1103-01) or 220 VAC (Included with FG1103-03) power supply

SPECIFICATIONS

DIMENSIONS (HWD)

◆  4" x 17" x 13 1/2" (10.2 cm x 43.2 cm x 34.3 cm)

◆  RU: 2

WEIGHT
31 lbs (14.1 kg)

POWER

◆  Average usage: 300 W

◆  Maximum: 960 W

ZONE SUPPORT

◆  Four independent audio zones

◆  Each zone is protected thermally

◆  Zone grouping

◆  Independent volume, bass, treble, balance and SRS controls in each zone

STEREO AMPLIFIERS

◆  40 W per channel stereo amplifiers (20 Hz to 20 KHz @ .1% THD)

◆  Amplifiers are protected from overload and thermal runaway

FRONT PANEL COMPONENTS

◆  Light Bar: Blue light bar indicates power status

◆  LEDs: Blue LEDs indicate level status

◆  Function/Navigation Buttons: 5 pushbuttons allow for front panel programming, selection of sources, tuning AM/FM radio stations, or Sirius satellite radio stations (when equipped with the optional Sirius and/or AM/FM Tuner Card)

◆  IR Receiver: This is where you must aim the remotes from your audio source components so the controller can learn and emulate those commands

◆  LCD Display: Displays information necessary during the programming steps and afterward is the display to indicate information about the source input and zone activity

REAR PANEL COMPONENTS

◆  Power Switch/Receptacle: Master power switch remains in the ON position normally

◆  Paging In/Out Ports: RCA jacks to connect to paging devices (any audio input can be used as a paging device). The Paging device connects to the Controller via the "Paging In" connector. The "Paging Out" connector is used to carry the page to Zone Expander(s).

◆  RJ-45: Port for PC control

◆  RS-232 Port: DB9 connector allows the Tango Audio Controller to receive controller command messages and provide status messages. This port is intended primarily for troubleshooting or connection to a NetLinx Controller.

◆  AM/FM Antenna Inputs: Connections for the AM and FM antennas

◆  Audio Inputs: stereo inputs, 47K impedance, buffered

◆  Audio Outputs: stereo looping outputs, buffered

◆  IR Outputs: Four IR 3.5 mm mono output jacks

◆  Zone Outputs: 4 zone output connectors (connect to speakers or Metreau audio keypads)

◆  Expansion Port: RJ-11 port connects controller with zone expanders

INCLUDED ACCESSORIES

◆  IR01 IR Emitter Module (FG-IR01)

◆  FM Antenna

◆  Power Cord