QQ在线
产品介绍
OVERVIEW
The Lutron Clear Connect CCD-OCRB-P wireless occupancy/vacancy sensor automatically turns lights on when a person enters a room and turns lights off when the room is empty. As a battery powered (5-10 year battery life) and wireless device, the occupancy/vacancy sensor can be added to a Clear Connect System and be installed in any room without the need for wiring. When integrated with AMX's Resource Management Suite®, power to electronic appliances such as a projector or video conferencing system can be turned on or off based on occupancy. Available in a white ceiling mount configuration.
FEATURES
◆ Clear Connect Enabled – Lutron's patented RF Technology uses a quiet band, essentially free of interference ensuring reliable communication between system devices
◆ Vacancy Sensing – Automatically turn off the lights and when integrated with RMS turn off electronic appliances off when a person leaves the space
◆ Occupancy Sensing – Turn lights on when a person enters a room and when integrated with RMS automatically turns on electronic appliances in the room
◆ Simple Web Configuration – Browse to the NetLinx® Clear Connect Gateway URL to quickly setup the Clear Connect Switch
SPECIFICATIONS
POWER
◆ Operating voltage: 3 V
◆ Operating current: 20 μA nominal
◆ Requires two CR 123 lithium batteries
◆ 10-year battery life design
◆ Non-volatile memory (saved changes are stored during power loss)
ENVIRONMENTAL
◆ Operating Temperature: 32° F (0° C) to 104° F (40° C)
◆ Operating Humidity: 0% to 90%, non-condensing
◆ Indoor use only
SENSOR COVERAGE TEST
◆ Front accessible test button
◆ Lens illuminates orange in response to motion during test mode and is visible from 30 ft (9.1 m) Wireless Communication Test
◆ Front accessible test buttons
◆ Turn loads on and off
TIMEOUT OPTIONS
◆ 5 minutes
◆ 15 minutes *
◆ 30 minutes
AUTO-ON OPTIONS (OCCUPANCY VERSION ONLY)
◆ "Always" * - Sensor turns lights ON and OFF automatically
◆ "Low light" - Sensor turns lights ON automatically only in low ambient light conditions. Sensor turns lights OFF automatically
◆ "Disable" - Lights must be turned ON manually from dimming or switching device. Sensor turns lights OFF automatically
SENSITIVITY OPTIONS
◆ Low Activity *
◆ Medium Activity
◆ High Activity
*default settings
CERTIFICATIONS
FCC, IC, Meets CA Title 24 requirements
