QQ在线
产品介绍
OVERVIEW
The Enova DGX 16 Enclosure is a 16x16 Digital Media Switcher that includes an integrated NetLinx Controller, redundant power supplies and can be populated with Enova DGX video input and output boards in addition to optional audio insert/extract boards. There are four connections per video board, and each enclosure holds four video input boards and four video output boards for a maximum matrix of 16x16.
The Enova DGX 16 is far beyond a modular matrix switcher with built-in controller - it functions as the centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plug-and-play operation. No tools, no delays and no key constraints – it just works with AMX's exclusive InstaGate ProTM Technology. Built for today's and tomorrow's needs, a comprehensive set of Enova DGX hot swappable boards can be used in conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over twisted pair cable or fiber. An integrated NetLinx Controller and embedded Ethernet switch enables management of the entire solution including source equipment and display devices located throughout the environment – all from a single point of control.
In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Built-in SmartScale® Technology on every output provides video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different supported resolutions - making it easy to specify, easy to install and easy to use. With the powerful combination of analog-to-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every time – regardless of signal type.
As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP signals, plus control and power up to 100 meters over one standard twisted pair cable to and from the Enova DGX using the DXLink Transmitters/Receivers. For applications with further distance requirements DGX Fiber Transmitters/Receivers can be used.
COMMON APPLICATIONS
The Enova DGX 16 is ideal for commercial or residential installations requiring the highest quality video to be shared between 16 local or remote AV sources and destinations. Compact form factor allows for installation in locations where space is limited and included redundant power supplies provides for constant uptime for mission critical applications.
FEATURES
◆ HDMI/HDCP Switching with Simplicity of Analog – End-to-end distribution of HDMI/HDCP without interruption or key constraints using InstaGate Pro Technology
◆ AV and Control over Twisted Pair – Send audio, video, bi-directional control and Ethernet up to 100m over one standard twisted pair cable
◆ Embedded NetLinx Controller – Allows any connected device to be managed, monitored or controlled
◆ Integrated Ethernet Switch – Pass Ethernet or stream IP video through the attached DXLink Transmitter or Receiver
◆ Analog to Digital Video Conversion with Scaled Outputs – Converts any source signal to digital and uses SmartScale Technology to automatically output video that is perfectly scaled for each connected display
◆ 4 RU Enclosure – Comparatively speaking, that's half the space of the competition
SPECIFICATIONS
GENERAL
AC Power:
100-240 VAC single phase, 50-60 Hz
Power Consumption (Max):
930 Watts, with redundancy
1760 Watts, without redundancy
Power Consumption (Typ):
362 Watts, fully loaded HDMI enclosure with redundancy
BTU/HR (Max):
3173, with redundancy
6005, without redundancy
BTU/HR (Typ):
1235, fully loaded enclosure with redundancy
Operational Temperature:
32° to 104° F (0° to 40° C)
Storage Temperature:
-22° to +158° F (-30° to +70° C)
Humidity:
0 to 90% non-condensing
Dimensions (HWD):
6 13/16" x 19" x 15" (17.4 cm x 48.3 cm x 38 cm)
Dimensions (HWD) with Extractors:
6 13/16" x 19" x 16" (17.4 cm x 48.3 cm x 40.6 cm)
Rack Units:
4
Weight:
Approximately 55 lbs (24.95 kg) per loaded enclosure
Shipping Weight: Approximately 65 lbs (29.5 kg) per loaded enclosure
MTBF:
TBA
Per Channel Aggregate Data Rate (Max):
12.8 Gbps
Noise Level:
<58 dBA @ 1m (Typical @ 25°C)
Approvals (Pending):
CE, FCC Class A, UL, cUL, RoHS / WEEE compliant
INTEGRATED CONTROLLER
LAN/Ethernet Port:
NetLinx On Board Master is an NI-3100 Class Controller
TCP/IP Uplink Port (LAN 10/100/1000)
Supports up to 64-Port Unmanaged 10/100 Ethernet Switch^
Static IP or DHCP/DNS, SSL, Auto-negotiating, Half/Full duplex, Auto MDI/MDI-X Cross-Over
TCP/IP, UDP/IP, CIP, SMTP, SNMP, Built-in Web server
Includes support for DXLink Devices
RJ-45 Connector
Processor:
CPU 404 MIPS PowerPC
Memory:
SDRAM 256 MB
NVRAM 1 MB
Flash 2 GB
Program Port (USB):
USB Mini-AB (used for NetLinx Studio control)
ENCLOSURE CONTROL
Control Port (Serial):
Bidirectional RS-232
Baud Rates of 9600 (default), 19200, 38400, 57600
DB-9 Connector
Control Port (USB):
USB Mini-B
* Cascaded architecture actual throughput dependent on loading. Worst case per port throughput is 10 Mbps; best case is 100 Mbps; when used with 16 DXLink Transmitters and 16 DXLink Receivers.
