QQ在线
产品介绍
OVERVIEW
The DXLink HDMI Receiver features built-in SmartScale® Technology to deliver HDMI with HDCP that is perfectly scaled for each connected display automatically, eliminating the integration challenges that can occur when sources and displays have different optimal resolutions. It accepts audio, video, control and Ethernet over one standard twisted pair cable up to 100 meters away from a compatible Enova DVX All-In-One Presentation Switcher* or DXLink Transmitter Module; it accepts all this plus power over the same twisted pair cable when used in conjunction with the Enova DGX 16/32 Digital Media Switchers, Enova DVX-2150HD or DVX-2155HD. Mount the low-profile DXLink Receiver behind a display or above a ceiling mounted projector and control it using the built in RS-232 or IR ports. Plus monitor the connected display's settings, and send IR control signals back to the head end using the same twisted pair cable.
COMMON APPLICATIONS
The DXLink HDMI Receiver Module receives HDMI and control signals from a remote DXLink Transmitter, Enova DGX or compatible Enova DVX. The receivers built-in control ports can be used to control a destination device and the ICS Lan port provides IP an access point with used in conjunction with the Enova DGX or compatible Enova DVX.
FEATURES
◆ Only One Cable – Receive audio and video while passing control, Ethernet and power over one twisted pair cable
◆ SmartScale Technology – Automatically responds to the display's declared EDID information and scales the video to the best resolution and video parameters for that display without manual setup; this prevents inferior video quality when sources are forced to lower resolutions to support the least capable display in the system
◆ Native NetLinx Control Everywhere - Control connected destination devices using the built-in IR and RS-232 ports
◆ Standard Twisted Pair Cable – Save time and effort in installation by leveraging cost effective twisted pair cable
◆ HDCP Compliant
SPECIFICATIONS
GENERAL
Dimensions (HWD):1" x 8 3/4" x 5 1/5" (2.54 cm x 22.12 cm x 13.08 cm)
Weight:Approx. 1.1 lb (0.50 kg)
Shipping Weight:Approx. 2.20 lb (1.00 kg)
AC Power:
100-240 VAC single phase, 50-60 Hz
0.6 A @ 115 VAC max
DXLink Power:
RX unit can alternatively have power supplied over twisted pair cable when connected to DXLink Power sourcing device such as an Enova DGX 16/32 Digital Media Switcher DXLink Twisted Pair Output Board or Enova DVX-2150HD or DVX-2155HD All-In-One Presentation Switcher.
When using in conjunction with Enova DGX use the Enova DGX Configuration Tool located at AMX.com/enova to determine the power requirements of a configuration and whether any of the DXLink Transmitters or Receivers should be powered with the local power supply. The configuration tool contains instructions on how to determine power requirements
Power Consumption (Max):Local 12V supplied: 18 W
DXLink power supplied via Enova DGX 16/32 Digital Media Switcher DXLink Twisted Pair Output Board or Enova DVX-2150HD or DVX-2155HD All-In-One Presentation Switcher: 15 W
Power Connector:2.1 mm DC Power Jack
Mounting Options:Compatible with all V Style versatile mounting options including rack, surface or pole
Advanced Configuration Interface:USB Mini-B Connector
Transport Layer Throughput (Max):10.2 Gbps
Compatible AMX Products:
DXLink HDMI RX
DXLink Multi-Format TX Module
Enova DGX 16 / 32 Digital Media Switchers
Enova DVX-3155HD, DVX-2155HD, DVX-3150HD and DVX-2150HD All-In-One Presentation Switchers
Twisted Pair Cable Type:Cat5e, Cat6/6e, Cat6a, Cat7 of UTP, SF/UTP, S/FTP, and F/UTP varieties*
Twisted Pair Cable Length:Up to 328 ft (100 m)*
MTBF:TBA
Approvals:CE, FCC, UL, cUL, RoHS / WEEE Compliant
Included Accessories:Each HDMI RX ships with a desktop power supply (ENERGY STAR® qualified) with power cord
Optional Accessories:
AVB-VSTYLE-SURFACE-MNT, V Style Module Surface Mount (FG1010-722)
AVB-VSTYLE-RMK-1U, V Style Module Tray (FG1010-720)
AVB-VSTYLE-RMK-FILL-1U, V Style Module Tray w/fill Plates (FG1010-721)
AVB-VSTYLE-POLE-MNT, V Style Module Pole Mount (FG1010-723)
CC-NIRC, NetLinx IR Emitter Cable (FG10-000-11)
IR03, External IR Receiver Module (FG-IR03)
*Cable quality required in order to meet 100 meter distance should meet ANSI/TIA/EIA 568A-5 or better specification and be rated for 250 MHz or better. For cable runs approaching the 100m limit, Cat6/6e, Cat6a or Cat7 is recommended. It is recommended that the cabling between AMX systems/devices be a uniform run of solid core cabling with no patch cables or extensions. If a patch cable is required (for example, between a patch panel and an AMX device), the patch cable should be limited to 5 m total on each end. Best results have been seen using a Cat6 coupling device for attaching the cables together even when using lower rated Cat5e cabling. Important Notice: DXLink twisted pair cable runs for DXLink equipment should only be run within a common building
ENVIRONMENTAL
Temperature (Operating):32° to 104° F (0° to 40° C)
Temperature (Storage):-22° to 158° F (-30° to 70° C)
Humidity (Operating):5% to 85% RH (non-condensing)
Humidity (Storage):0% to 90% RH (non-condensing)
Power Dissipation (Max):
Local 12V supplied: 61 BTU/HR
DXLink power supplied via Enova DGX 16/32 Digital Media Switcher DXLink Twisted Pair Output Board or Enova DVX-2150HD or DVX-2155HD All-In-One Presentation Switcher: 51 BTU/HR
FRONT CONNECTORS
Advanced Configuration Interface:USB Mini-B Connector
BACK CONNECTORS
Local Power:2.1 mm DC Power Jack
DXLink Input:RJ-45
ICSLAN/Ethernet Port:RJ-45 Connector, TCP/IP Port (ICSLAN 10/100)
Serial:
3.5mm Pluggable Phoenix Terminal Block
Bidirectional RS-232
Standard NetLinx Baudrate 1200-115k
Parity support Odd/Even/None
IR Control:
Port for use with IR03 Receiver (Optional Accessory FG-IR03)
Port for use with CC-NIRC Emitter (Optional Accessory FG10-000-11)
USB (HID):USB Type B Connector
HDMI Output:HDMI Type A Female
Analog Stereo Output:3.5mm Mini-Stereo Jack
CONTROLS & INDICATORS
Power Indicator:Green indicates whether or not the module is powered on
Video Indicator:Green LED indicates the presence of video and audio signals through the module
Audio Indicator:Green LED indicates the presence of audio signals through the module
Scaling Button and LEDs:
1 push button and 3 green LEDs;
use Scaling button to select one of the 3 Scaling options:
Bypass, Auto (SmartScale), or Manual.
At system start up RX defaults to Auto (SmartScale)
IR TX Indicator:Red LED lights during the transmission of IR data via the rear IR port
IR RX Indicator:Yellow LED lights during the receipt of IR data via the rear IR port
RS-232 TX Indicator:Red LED shows serial transmit (TX) data activity
RS-232 RX Indicator:Yellow LED shows serial receive (RX) data activity
LINK/ACT:
Green LED lights when the Ethernet cable is connected and an active link is established. This LED also blinks when receiving Ethernet data packets
Status:Green LED lights when the Controller is programmed and communicating properly
CEC Indicator:Yellow LED shows CEC data activity when in point-to-point mode
USB Indicator:Yellow LED shows USB (HID) activity
ID Pushbutton:Places system in NetLinx Device ID assignment mode
HDMI
Compatible Formats:HDMI, HDCP, DVI
Signal Type Support:HDMI
DVI-D (Single Link with HDMI Cable Adapter)
Input Signal Type:
DXLink from any of the following: DXLink HDMI Transmitter Module, DXLink Multi-Format Transmitter Module, Enova DGX DXLink Twisted Pair Output Board, Enova DVX-3155HD, DVX-2155HD, DVX-3150HD and DVX-2150HD All-In-One Presentation Switchers
Output Signal Type:
HDMI
DVI-D (Single Link With Cable Adapter)
Output Scaling:SmartScale or Manual Configuration or Bypass
SmartScale Output Resolution Support:
All resolutions between 480p and 1920 x 1200 @ 60 Hz via automatic SmartScale query of the display's declared EDID Detailed Timing Definition
Output Nominal Voltage:1.0 Vpp Differential
Output Re-clocking:Yes
+5V DDC Pin Output:50 mA when using Enova DXLink Power, 500 mA when using local 12V supply
+5V USB Output:150 mA when using Enova DXLink Power, 500 mA when using local 12V supply
Output Rise Time / Fall Time:425 ps typ (20% - 80%)
Propagation Delay (Typ):25 ms when scaling, 5 us when in bypass mode
HDMI Audio Synchronization:
Video Formats @ 60Hz frame rate: Audio is actively delayed to match video within 9 ms leading to 10 ms lagging when scaling. When in bypass mode the audio is matched to video within 1 ms.
Data Rate (Max):4.95 Gbps / 6.75 Gbps^
Pixel Clock (Max):165 MHz / 225 MHz^
Progressive Resolution Support:
480p up to 1920x1200 @ 60 Hz (including but not limited to those resolutions shown on Digital Video Resolution Support Appendix)
Interlaced Resolution Support:
480i, 576i, 1080i (including but not limited to those Resolutions shown on Digital Video Resolution Support Appendix)
Interlace and progressive video supported into the Transmitter, progressive only supported out of the Receiver unless in non-scaling bypass mode
Deep Color Support:24-bit, 30-bit^, 36-bit^
Color Space Support:
RGB 4:4:4
YCbCr 4:4:4 and 4:2:2
Input signal support for YCbCr 4:4:4 and 4:2:2, output color-space is converted to RGB 4:4:4
3D Format Support:
Yes^ (HDMI Primary Formats)
Frame Packing 1080p up to 24Hz
Frame Packing 720p up to 50/60Hz
Frame Packing 1080i up to 50/60Hz
Top-Bottom 1080p up to 24Hz
Top-Bottom 720p up to 50/60Hz
Side-by-Side Half 1080p up to 50/60Hz
Side-by-Side Half 720p up to 50/60Hz
Audio Format Support:
Dolby TrueHD, Dolby Digital, DTS-HD Master Audio DTS, 2 CH L PCM, 6 CH L-PCM, 8 CH L-PCM
Dolby Digital and DTS support up to 48kHz, 5.1 channels.
Audio Resolution:16 bit to 24 bit
Audio Sample Rate:32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192kHz
Local Audio Support:Yes for audio extraction
HDCP Support:Yes
CEC Support:None
^Only supported when the DXLink HDMI Rx Scaler is in bypass mode and format is 1080p60 or less
STEREO AUDIO
Output Signal Types:Stereo Analog
Analog Output Level (Max):+2 dBu, unbalanced
Analog Output Frequency Response:< +0 dB to -0.5 dB, 20 Hz to 20 kHz
Analog Audio Output THD+N:<0.03 %, 1 kHz, -10dBu to +2 dBu
Analog Audio Out SNR:>85 dB, 20 Hz to 20 kHz Vin=+2dBu
Digital to Analog Reference Level:0 dBfs = +0 dBu
Audio Synchronization:
Video Formats @ 60Hz frame rate: Audio is actively delayed to match video within 9 ms leading to 10 ms lagging when scaling. When in bypass mode the audio is matched to video within 1 ms
Output Connectors：3.5mm Mini-Stereo Jack (Analog Stereo)
