触摸屏,用户界面附件 PoE供电 PS-PoE-AT-TC

OVERVIEW
With the high power PS-POE-AT-TC Injector, transmit both power and data through a single cable to a remotely located Power-over-Ethernet (PoE) touch panel. Required for use with the MVP-9000i and DXLink Twisted Pair Transmitters and Receivers, it is also compatible with the MXT-1000, MXD-1000, MXT-700, MXD-700 and MXD-430. This self-contained single-port PoE gigabit power supply "injects" DC power and data into the same twisted pair cable at a distance of up to 100 meters (328 feet).

COMMON APPLICATION
The PS-POE-AT-TC PoE Injector sends power and data on demand to wall or table docking stations of compatible touch panels via a single Ethernet connection.

FEATURES
• 10/100/1000 (MbPS) Data Rates
• Meets IEEE802.3at requirements
• Load Diagnostic LED
• 100/240 VAC Universal Input

SPECIFICATIONS

DIMENSIONS (HWD)
5 1/2"×2 1/8"×1 1/4" (14cm×5.3cm×3.25cm)

WEIGHT
44 lbs (200 kg)

ENVIRONMENTAL
• Temperature (Operating):
• -4°F to 104°F (-20°C to 40°C) @ 30W
• -4°F to 131°F (-20°C to 55°C) @ 22.5W
• Temperature (Storage): -4°F to +158°F (-20°C to +70°C)
• Relative Humidity (Operating): Maximum 90%, Non-Condensing
• Thermal Rating: 20 BTU/hr (@240VAC)
• Operating Altitude: -1000 to 10,000 ft. (-304.8 to 3048 m)

GENERAL
• LEDs:
• Yellow (On): power is on and active
• Green (On): A remote terminal is connected
• Green (Blinking): Overload state or short circuit
• Enclosure: Molded black matte plastic
• Cord and Connectors: Dual shielded RJ45 jacks built into the enclosure, EIA 568A and 568B
• Approvals:
• IEEE 802.3at (PoE)
• RoHS / WEEE compliant
• CE
• FCC Part 15, Class B
• EN 55022 Class B (Emissions)
• EN 55024 (Immunity)
• VCCI (Japan)
• C-Tick
• UL/cUL per IEC 60950-1
• GS Mark per IEC 60950-1

INPUT SPECIFICATIONS
• AC Input Voltage Range: 100-240 VAC
• AC Input Current: 0.8A @ 100-240 VAC
• AC Frequency: 50 to 60 Hz
• AC Input Current: 0.8A MAX at 110-240 VAC
• Protection:
• Internal Primary Current Fuse
• Inrush Limiting
• Input Power Cord: Universal Power Cord, 3 Foot

OUTPUT SPECIFICATIONS
• Pass Through Data Rates: 10/100/1000 Mbps
• Output Voltage: 55 VDC Nominal
• Output Power: 30 Watts (Guaranteed)
• Output Current: 0.6A (max)
• Ripple and Noise: Below the IEEE802.3af requirements
• f<500Hz: Vp-p 0.5
• 500Hz to 150kKHz: Vp-p 0.2
• 150KHz to 500KHz: Vp-p 0.15
• 500KHz to 1MHz: Vp-p 0.1
• Transient Response: Meets IEC61000-4-4 (1Kv)
• DXLink Transport Layer Throughput: 10.2 Gbps pass thru (only applicable to DXLink signals)

• DX-TX, DXLink™ Multi-Format Transmitter Module (FG1010-310)
• DX-TX-DWP, DXLink Multi-Format Decor Style Wallplate Transmitters (US) (FG1010-325-BL/-WH)
• DX-TX-WP, DXLink Multi-Format Wallplate Transmitters (FG1010-320-BL/WH)
• DX-RX, DXLink HDMI Receiver Module (FG1010-500)
• MVP-9000i, 9” Modero® ViewPoint® Touch Panel with Intercom (FG5967-01/02)