QQ在线
产品介绍
Product Overview
Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.
Product Details
Minimum Guaranteed Power per channel, channels driven |
XLS 1000 |
XLS 1500 |
XLS 2000 |
XLS 2500 |
2-ohm Dual |
550W |
775W |
1050W |
1200W |
4-ohm Dual |
350W |
525W |
650W |
775W |
8-ohm Dual |
215W |
300W |
375W |
440W |
8-ohm |
700W |
1050W |
1300W |
1550W |
4-ohm |
1100W |
1550W |
2100W |
2400W |
XLS
●XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
●Integrated PureBand™ Crossover System for better performance and control
●Peakx™ Limiters provide maximum output while protecting your speakers
●XLR, 1/4", RCA inputs provide outstanding flexibility
●Efficient forced-air fans prevent excessive thermal buildup
●Electronically balanced XLR inputs; touchproof binding post and Speakon® outputs
●Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
●Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Specifications
XLS DrivecoreSeries |
|
Sensitivity (for full rated power at 4 ohms) |
1.4 Vrms |
Frequency Response (at 1 watt, 20 Hz - 20 kHz) |
+0dB, -1dB |
Signal-to-Noise Ratio |
Rated as dBr to full rated 8 ohm power output (A-Weighted): |
Damping Factor (8 ohm): 10 Hz to 400 Hz |
> 200 |
Crosstalk (below rated 8Ω power) |
At 1 kHz: > 85dB |
Input Impedance (nominal) |
20 kilohms balanced, |
Load Impedance |
2 to 8 ohms per channel in Stereo |
AC Line Voltage and Frequency Configurations |
120 VAC 60 Hz |
Ventilation |
Flow-through ventilation from front to back |
Cooling |
Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation |
Air Volume Requirements (per minute per unit) |
80.15 ft3 (2.27 m3) |
Integrated Processing |
PureBandTM Crossover System |
Input/Output |
Input Connectors: XLR (one per channel), 1/4-Inch (one per channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to ditribute signal to additional amplifiers. Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-pole Speakon® connectors. The top Speakon connector is wired for both channels so it can be used for bridgemono wiring or for stereo wiring of two wpeakers to a single Spekon connector. One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.) |
Construction |
XLS1000/XLS1500: 8.12-Inch (20.62cm) depth |
Dimensions |
EIA Standard 19-Inch (48.3-cm) rack mount width (EIA RS-310-B), 3.5-Inch (8.9-cm) height. XLS 1000/1500: 7.7-Inch (19.6-cm) depth. XLS 2000/2500: 10.7-inch (27.2-cm) depth. |
Net Weight, Shipping Weight |
XLS1000: 8.6 lb (3.9kg), 13.6 lb (6.2 kg) |
