QQ在线
产品介绍
■ Load Impedance: Safe with all types of loads. Rated for 4 and 8 ohms in Stereo mode, 4 ohms in Bridge-Mono mode.
■ Voltage Gain to 1-kHz, 8-ohm rated output, 30.5-dB gain at 1.4-volt sensitivity; 26-dB gain at 2.34-volt sensitivity.
■ Required AC Mains: 50/60 Hz (North American units are 60 Hz only); 100, 120 and 230-240 VAC (±10 ) units are available.
■ Power Draw At Idle: 90 watts
■ AC Line Connector: NEMA 5-15P (15 A).
Minimum Guaranteed Power |
CE 1000 |
120 VAC, 60 Hz Units, Stereo mode, per channel, both channels driven |
|
1 kHz with < 0.5% THD |
|
2 ohms
4 ohms
8 ohms |
560 W
450 W
275 W |
120 VAC, 60 Hz Units, Bridge mono mode |
|
1 kHz with 0.1% THD |
|
4 ohms
8 ohms |
1,100 W
900 W |
Performance |
CE 1000 |
Frequency Response (at 1 watt, 20Hz - 25 kHz) |
± 0.2 dB |
Phase Response (at 1 watt, 20Hz - 20 kHz) |
± 15° |
Signal to Noise Ratio below rated power (20 Hz to 20 kHz) |
> 100 dB |
Total Harmonic Distortion (THD) at rated power, from 20 Hz to 20 kHz |
0.5% |
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1,
from 163 milliwatts to full bandwidth power |
< 0.1% |
Damping Factor: 10 Hz to 400 Hz |
> 400 |
Crosstalk (below rated power, 20 Hz to 20 kHz) |
> 55 dB |
Common Mode Rejection (CMR) (20 Hz to 1 kHz) |
> 70 dB |
DC Output Offset (Shorted input) |
±10 mV |
Input Impedance nominally balanced, nominally unbalanced |
20 k ohms, 10 k ohms
|
Load Impedance (Note: safe with all types of loads) |
|
Stereo
Bridge Mono |
2, 4 and 8 ohms
4 and 8 ohms |
Voltage Gain (at maximum level setting, to 1-kHz, 8-ohm rated output) |
|
26 dB setting
1.4V setting |
26 dB
30.5 dB |
Required AC Mains (configured country-specific) |
50/60 Hz, 100 - 240 VAC |
Power Draw at Idle |
90 watts |
Cooling |
Proportional speed fan |
Dimensions: Width, Height, Depth |
EIA Standard 19 in. (48.3 cm) x 5.25 in. (13.34 cm) x 12.25 in. (31.11 cm) |
Net Weight, Shipping Weight |
32.6 lb (14.79 kg), 38.6 lb (17.49 kg) |
