QQ在线
产品介绍
The Martin Audio LE2100S is a very high performance monitor designed for large-stage applications where maximum SPL’s are required. It features twin, high-specification 12” (300mm) low frequency drivers, a unique 6.5” (165mm) midrange device and a 1” (25mm) exit compression driver mounted on a differential dispersion horn. Differential dispersion technology increases the area over which a constant SPL and consistent frequency response is maintained at ear height, enabling the artist to move around more freely.
The LE2100 is best used with the DX1.5 controller to provide crossover, limiting and EQ functions.
FEATURES
Two 12" (300mm) ultra-long excursion high power, neodymium motor bass drivers
6.5" (135mm) high power, phase plug loaded neodymium motor midrange driver
1" (25mm) exit titanium dome, neodymium motor compression driver
Optimised constant directivity differential dispersion HF horn
Symmetrical array, 3-way, bi-amp design
Contemporary, multi-laminate ply and hardwood cabinet
Frequency response 56Hz-18kHz ±3dB, -10dB @ 48Hz
4 ohm nominal impedance
Discreet connectors
Fitted with 4 x M8 rigging inserts
TECHNICAL SPECIFICATIONS |
|
TYPE |
Three-way reflex stage monitor with symmetrically arrayed 2 × 12"LF,phase plug loaded MF and differential dispersion HF horn |
FREQUENCY RESPONSE(1) |
56Hz-18kHz±3dB |
-10dB @ 48Hz |
|
DRIVERS |
2×12"(300mm)/3"(75mm) voice coil,ultra-long excursion,water resistant cone |
1"(25mm) exit,1.7"(44mm) voice coil titanium dome HF compression driver |
|
RATED POWER(2) |
LF:800W AES,3200W peak |
MF+HF:250W AES,1000W peak |
|
RECOMMENDED AMPLIFIER |
MA5.2K |
SENSITIVITY(3) |
LF:101dB,MF+HF:102dB |
MAXIMUM SPL(calculated @ 1m) |
LF:130dB continuous,136dB peak |
MF+HF:126dB continuous,132dB peak |
|
NOMINAL IMPEDANCE |
LF:4 ohms |
MF+HF:8 ohms |
|
DISPERSION(-6dB) |
60°-100°horizontal(differential dispersion),60°vertical |
CROSSOVER |
606Hz active via DX1.5 or DX2 controller,3kHz passive |
ENCLOSURE |
89 litres |
FINISH |
Textured black paint |
PROTECTIVE GRILLE |
Black perforated steel |
CONNECTORS |
4×Neutrik NL4 |
FITTINGS |
4×skids |
4×M8 inserts |
|
DIMENSIONS |
(W)826mm×(H)385mm×(D)582mm |
(W)32.5ins×(H)15.2ins×(D)22.9ins |
|
WEIGHT |
39.5kg(87lbs) |
