AMX 双电源DXLink™控制器 PDXL-2

OVERVIEW
The PDXL-2 is a Power over DXLink injector which allows for remote powering of any two DXLink devices by "injecting" power through the twisted pair cable. The PDXL-2 also accepts I/O control from a NetLinx controller allowing power down capabilities to either (or both) of the connected DXLink devices to achieve power savings when they are not in use.
The PDXL-2 Dual Power over DXLINK Controller provides the ability to power a point-to-point DXLink Transmitter to DXLink Receiver without the need for an AC outlet in proximity to the location of the DXLink devices. When used with a NetLinx controller, the PDXL-2 can power down the DXLink devices as part of a standby mode for an entire room to reduce energy usage.

SPECIFICATIONS

DIMENSIONS (HWD)
1 7/16"×7" × 6 13/16" (36.3cm×177.8cm×172.4cm)

WEIGHT
2.25 lbs (1.02 kg)

ACTIVE POWER REQUIREMENTS
• Power Connector: (1) 100-240V, 50/60 Hz, 1.6 A
• Power Consumption:
• Maximum Current Draw: 1.0 A
• Typical Current Draw: 0.35 A

*Note: Power consumption varies based on the number and type of powered devices

ENVIRONMENTAL
• Temperature (Operating): 32°to 104oF (0° to 40°C)
• Temperature (Storage): –4° to 158°F (–20° to 70°C)
• Humidity (Operating): 90%, Non-condensing (maximum)
• Humidity (Storage): 95%, Non-condensing (maximum)
• Operating Altitude: –1000 to 10,000 ft. (–304.8 to 3048m)

DXLINK
• DXLink Ports: (2) sets of 2 RJ-45 LAN connectors
• Transport Layer Throughput: 10.2 Gbps pass thru
• Power over DXLink Output: (per output)
• Pin Assignment & Polarity 4/5 (+), 7/8 (–)
• Output Power Voltage 55 VDC
• Output Power 30 Watts (guaranteed)

CONTROL
• Relay Connection Type: (1) 4-pin 3.5 mm (female) captive-wire connectors
• GND
• Relay Port2
• Relay Port1
• +12V
• Relay Description:
• NetLinx Ports 1 & 2
• Channels 1-2
• Each relay can switch up to 24 VDC or 28 VAC @ 1 A
• Each relay is independently controlled
• Relays: 2

*Note: Connecting the PDXL-2 to the I/O port on the NetLinx Central Controller enables you to power off devices

INDICATORS
• (2) LEDs (1 for each DXLink Powered Output)
• Yellow (On): power is on and active
• Green (On): A remote terminal is connected

GENERAL
• Front Components
• AC Power Indicator
• Channel Power Indicator
• Back Components
• DXLink Ports
• Power Connector
• Certifications
• FCC Part 15 Class A
• CE EN 55022 Class A
• CE EN 55024
• CE EN 60950-1
• IEC 60950-1
• C-Tick CISPR 22 Class A
• UL 60950-1
• Mounting Options
• Compatible with all V Style versatile mounting options including rack, surface or pole
• Compatible AMX Products
• DXLink HDMI Transmitter Module
• DXLink Multi-Format Transmitter Module
• DXLink Multi-Format Decor Style Wallplate Transmitters (US)
• DXLink Multi-Format Wallplate Transmitters
• DXLink HDMI Receiver Module