AMX 通信网关 CSG-500

OVERVIEW
The CSG-500 Communications Gateway is a stand alone PBX (Private Branch Exchange) that allows intercom-enabled Modero Touch Panels to be transformed into full-featured IP phones. With the CSG and an intercom-enabled Modero Touch Panel, you have access to phone features like call waiting, caller ID, call queuing, and voice mail. The CSG supports AMX touch panels with intercom functionality, which include the MVP-8400i, NXD-1000Vi, and NXD-700Vi, as well as third-party SIP phones. The CSG-500 runs a version of Asterisk which is an industry standard for VoIP PBX systems.

COMMON APPLICATION
Ideal for installation in residences and commercial applications where it is useful to use a touch panel as an intercom or to to make or receive phone calls from other touch panels or telephones anywhere in the world.

FEATURES

◆  Local, long distance, and international calling via VoIP service providers

◆  Caller ID, call waiting, call groups, call queuing, IVR support and voice mail

◆  Uses Session Initiation Protocol, the standard for VoIP technology

◆  Supports both AMX intercom-enabled touch panels and third-party SIP phones

◆  Supports up to 50 users and 25 concurrent calls

SPECIFICATIONS

DIMENSIONS (HWD)

◆  1 3/4" x 11 1/2" x 5 1/2" (4.41 cm x 29.09 cm x 13.82 cm)

◆  RU: 1

WEIGHT
2.25 lbs (1.02 kg)

ENCLOSURE
Metal with black matte finish

POWER
Constant current draw: 2.6 A @ 12 VDC

MEMORY

◆  8 MB on board serial Flash memory

◆  64 MB 16-bit parallel SDRAM

CERTIFICATIONS
FCC (Class A), CE, IEC 60950, and RoHS

ENVIRONMENTAL

◆  Operating Temperature: 0° C (32° F) to 40° C (104° F)

◆  Operating Humidity: 5% to 85% RH Non-Condensing

◆  Storage Temperature: -20° C (-4° F) to 70° C (158° F)

◆  Storage Humidity: 0% to 85% RH Non-Condensing

◆  Heat Dissipation (Typical): 106.6 BTU/hr

FRONT PANEL COMPONENTS

◆  Power LED: Indicates whether the unit is turned on and receiving power

◆  Network LED: Indicates whether a network cable is connected and the speed of the network

◆  IP Phones LEDs: Indicates whether the corresponding link is connected and the speed of the link

◆  Analog LEDs: Indicates whether the analog port is installed and the type of port (FXO/FXS) installed (Not available on all models.)

REAR PANEL COMPONENTS

◆  Power Connector: 5.1 mm OD, 2.1 mm pin, 12V 3.0A center positive

◆  Configuration Reset Switch: Resets the current configuration to the factory default when pressed

◆  Console port: 1 RJ-45 10/100baseT port for console (craft) port serial control

◆  Network port: 1 RJ-45 10/100baseT port for a general (WAN) connection

◆  IP phones ports: 4 RJ-45 10/100baseT ports for IP phone connections

INCLUDED ACCESSORIES

◆  PS5.0, Power Supply, 5.0A, 12.0 VDC (FG423-31)

◆  CSG Communications Gateway Installation Guide (93-2182-01)

◆  2 Surface mounting brackets (62-2182-04)

◆  4 #4-40 X .250 PPH screws (80-0112)