|
XM6150 |
XM4220 |
Power Output Level |
20Hz - 20kHz THD+N=0.2% |
8Ω 4Ω 8Ω/BRIDGE |
100W x 6 120W x 6 240W x 3 |
140W x 4 180W x 4 360W x 2 |
1kHz THD+N=0.2% |
8Ω 4Ω 8Ω/BRIDGE 70.7V 150W x 3 |
120W x 6 150W x 6 300W x 3 150W x 3 |
170W x 4 220W x 4 440W x 2 350W x 2 |
Power Bandwidth Half power |
10Hz - 40kHz (THD+N=1%) |
THD+N 20Hz - 20kHz, Half power |
≤0.2% |
Frequency Response 8Ω, Po=1W |
0dB, 0.5dB, -1dB 20Hz - 50kHz |
Intermodulation Distortion 60Hz: 7kHz, 4:1, half power |
≤0.2% |
Channel Separation Half power RL=8Ω 1kHz Vol. max input 600Ω shunt |
≥60dB |
Residual Noise Vol. max 12.7kHz LPF |
≤-68dB |
≤-66.5dB |
S/N Ratio 12.7kHz LPF |
100dB |
Damping Factor 8Ω, 1f=1kHz |
≥100 |
Sensitivity (Vol. max) Rated power into 8Ω |
0dB |
Voltage Gain (Vol. max) |
32.1dB |
33.6dB |
Input Impedance |
30kΩ (balance) 15kΩ (unbalance) |
Controls |
Front panel |
POWER switch (ON/OFF) |
Rear panel |
Volume (31 position)/ch Bridge switch (ON/OFF)/2ch HPF switch (ON/OFF)/ch fc=80Hz, -12dB/oct Input A ch to all ch switch |
Connectors |
Input |
XLR-3-31 type/ch Euroblock connector |
Output |
5 way binding post |
Indicators |
POWER |
Green |
PROTECTION |
Red |
CLIP |
Red |
SIGNAL |
Green |
Protection Circuit |
POWER switch on muting DC detection Temp. detection (heat sink temp ≥85C) |
PC Limiter |
RL ≤2Ω |
Fan Speed |
Low/~50C variable, High/~70C |
Power Requirements |
US and Canada |
120V, 60Hz |
Europe model |
230V, 50Hz |
Other |
240V, 50Hz |
Power Consumption |
Idling |
45W |
1/8 output power, 4Ω |
400W |
Maximum output, 4Ω |
1800W |
Dimensions (W x H x D) |
480 x 132 x 319mm (18-7/8 x 5-3/16 x 12-9/16) |
Weight |
18kg (39.7lbs.) |
Accessory Euroblock Connectors |
x 6 |
x 4 |
0dB=0.775V Half power=1/2 power output level |
* Features, Specifications and Accessories subject to change without notice |